Principle and process analysis of electrocoagulation technology for Hongjie Water

Electroflocculation technology is an electrochemical technology that combines some advantages of electrochemistry. It uses electricity to effectively replace chemical reagents, reducing economic costs and effectively removing heavy metals and suspended solids from water sources. It can scientifically and reasonably remove emulsified organic matter and other pollutants. It is an emerging technology, It has been continuously improved in practical use and operation, and the effect has also been recognized in various aspects. The electrocoagulation technology truly started in the late 20th century, but its theory was gradually established in the early 20th century. Due to the immaturity of equipment and limited practice, it has not been widely used until the late 20th century, when it was truly improved and enhanced in practical use. Nowadays, this technology has made significant breakthroughs and has become one of the main technologies used in water treatment in countries such as Europe and America. While reasonably controlling economic costs and equipment management, the results achieved are also quite significant. The following text will provide a detailed analysis of its main techniques and operations.

The electrocoagulation technology generates an electric field between multiple steel plates by applying direct current to them. After the treated water flows into the gaps between the steel plates, a portion of the steel plates that are being electrified are consumed and enter the water source. At the same time, ionic and non-ionic pollutants in the electric field react with the ionized products in the electric field after being affected by the electric field, The consumption of water in the electric field is also added to the reaction, and various ions interact with each other to form solid particles in the most stable form. They gradually precipitate out in the water flow, achieving the goal of purifying water. This is the main working principle of electrocoagulation technology. In electrocoagulation technology, the water source enters the homogenization tank from the well, and the function of the homogenization tank is to balance the water flow in the water pump, effectively control the difference in water flow rate between it and the electrocoagulation reactor, and provide strict protection for the reaction. Then, the water flows into the reactor. Generally speaking, two reactors are connected together to draw water from the homogenization tank into the reactor. Inside, there is a steel plate that can react with ions ionized from the water, achieving the purpose and effect of pretreatment. At the bottom of the reactor, there is an inclined cavity designed to attract heavier particles from the water flow and treat any remaining pollutants such as iron scale. These substances, due to their heavy weight, gradually sink into the cavity and do not move forward with the water flow. Then, the water flow will sequentially pass through sludge storage equipment, defoaming tank, sedimentation tank, and sand filter tank, among which further pollution substance treatment is carried out, completing a series of process flows to remove particles, dust substances, sand and gravel in the water, and achieve the best water treatment effect. Based on actual usage and operation experience, the effect of electrocoagulation technology is relatively good. With reasonable cost control and equipment management, it has achieved good usage results.

More information can be found on the official website of Shenzhen Hongjie Water Technology Co., Ltd. www.19hj.com. If you need it, you can call the company's hotline for free at 180 3800 0078, and we will be happy to serve you.