Products
Automatic water softening equipment for steam boiler(Customizable as needed)
Feature
Details
軟水處理設備是采用離子交換原理,去除水中鈣、鎂等結垢離子,通常由控制器、樹脂罐、鹽罐組成的一體化設備。其控制器可選用自動沖洗控制器,手動沖洗控制器。自動控制器可自動完成軟水、反洗、再生、正洗及鹽業箱自動補水全部工作的循環過程。樹脂罐可選用玻璃鋼罐、炭鋼罐或不銹鋼罐。鹽罐主要裝備鹽用于樹脂胞和后的再生。
Soft water treatment equipment is an integrated equipment, which uses the principle of ion exchange to remove calcium, magnesium and other scaling ions in water, and is usually composed of controller, resin tank and salt tank. The controller can choose automatic flushing controller and manual flushing controller. The automatic controller can automatically complete the cycle process of soft water, backwashing, regeneration, washing and automatic water supplement of salt tank. The resin can be made of FRP, carbon steel or stainless steel. The salt tank is mainly equipped with salt for regeneration of resin cell and resin.
一、工作原理
1、 How it works
水的硬度主要是由其中的陽離子:鈣(Ca2+)、鎂(Mg2+)離子構成的。當含有硬度離子的原水通過離子交換樹脂層時,水中的鈣、鎂離子與樹脂內的鈉離子發生置換,樹脂吸附了鈣、鎂離子而鈉離子進入水中,這樣從交換器內流出的水就是去掉了硬度離子的軟化水。隨著交換過程的不斷進行,樹脂中Na+全部被置出來后就失去了交換功能,此時必須使用Nacl溶液對樹脂進行再生,將樹脂吸附的Ca2+、Mg2+置換下來,樹脂重新吸附了鈉離子,恢復了軟化交換能力。
The hardness of water is mainly composed of cations: Ca2 + and Mg2 +. When the raw water containing hardness ions passes through the ion exchange resin layer, the calcium and magnesium ions in the water are replaced with the sodium ions in the resin. The resin adsorbs calcium and magnesium ions, and the sodium ions enter the water. In this way, the water flowing out from the exchanger is the softened water without hardness ions. With the continuous exchange process, after all Na + ions in the resin are put out, the exchange function is lost. At this time, the resin must be regenerated with NaCl solution, and the Ca2 + and Mg2 + absorbed by the resin are replaced. The resin reabsorbs sodium ions and recovers the softening exchange ability.
二、產品特點
2、 Product features
1、自動化程度高,供水工況穩定。
1. High degree of automation, stable water supply conditions.
2、先進程序控制裝置,運行準確可靠,替代手工操作,完全實現水處理的各個環節的 自動轉換。
2. Advanced program control device, accurate and reliable operation, instead of manual operation, fully realize the automatic conversion of all aspects of water treatment.
3、高效率低能耗,運行費用經濟。由于軟水器整體設計合理,使樹脂的交換能力得以 充分發揮,設備采用射流式吸鹽,替代鹽泵,降低了能耗。
3. High efficiency, low energy consumption and economic operation cost. Because the overall design of water softener is reasonable, the exchange capacity of resin can be brought into full play. The equipment adopts jet type salt absorption instead of salt pump, which reduces energy consumption.
4、設備結構緊湊,占地面積小,節省了基建投資,安裝、調試,使用簡便易行,運行。
4. The equipment has compact structure, small floor area, saving capital investment, installation and debugging, easy to use and easy to operate.
技術參數
technical parameter